Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM (w/o Parking Support Brake System)
RM3620E _56 Audio / Visual / Telematics _076129 PARK ASSIST / MONITORING _0370840 TOYOTA PARKING ASSIST-SENSOR SYSTEM(w/o Parking Support Brake System) W

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM(w/o Parking Support Brake System)  CUSTOMIZE PARAMETERS  


CUSTOMIZE TOYOTA PARKING ASSIST-SENSOR SYSTEM


a.

Customizing with the GTS.

NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the TOYOTA parking assist-sensor system on.


iv.

Turn the GTS on.


v.

Enter the following menus: Body Electrical / Clearance Sonar / Utility / Customize Setting.


vi.

Select the setting by referring to the table below.

Warning
Tester Display Description Default Setting ECU
Fr Sensor Onset Range Sets the detection operation range for the front center sensors.* Wide 0:Narrow,1:Wide Clearance warning ECU assembly
Rr Sensor Onset Range Sets the detection operation range for the rear center sensors. Wide 0:Narrow,1:Wide Clearance warning ECU assembly
Fr & Rr Buzzer Volume Changes the buzzer volume setting. M 01:L,10:M,11:H Clearance warning ECU assembly
Clearance Sonar Auto Mute Function Sets the availability of the auto mute function. OFF 0:ON,1:OFF Clearance warning ECU assembly
50006 7

*: for 8 Sensor Type


Sensor
Tester Display Description Default Setting ECU
Sensor Condition N Makes the front sensors available when the shift lever is in N. Avail 0:Not Avail,1:Avail Clearance warning ECU assembly
50006 13


b.

Customizing with the multi-information display.

NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



i.

Turn the ignition switch to ON.


ii.

Turn the TOYOTA parking assist-sensor system on.


iii.

Enter the following menus: Setting / Vehicle Setting / Parking assist.


iv.

Select the setting by referring to the table below.

TOYOTA parking Assist-sensor Setting
Display Description Default Setting ECU
Volume Sets the buzzer alert volume. 2 1, 2 or 3 Clearance warning ECU assembly