Home › Drivetrain › K120 (MULTIDRIVE / CVT) › DIFFERENTIAL CASE
RM3620E _52 Drivetrain _076272 K120 MULTIDRIVE / CVT _0371731 DIFFERENTIAL CASE A

K120 MULTIDRIVE / CVT  DIFFERENTIAL CASE  DISASSEMBLY  


PROCEDURE

Hide 41221 1.REMOVE FRONT DIFFERENTIAL RING GEAR

a.
C399101

Secure the front differential ring gear in a vise between aluminum plates.

NOTICE:

Be careful not to damage the front differential ring gear in the vise.



b.

Remove the 12 bolts from the front differential ring gear.


c.

Using a plastic-faced hammer, tap on the front differential ring gear to remove it from the differential case sub-assembly.