Home › Engine / Hybrid System › STOP AND START › VACUUM SENSOR ASSEMBLY
RM3620E _51 Engine / Hybrid System _076400 STOP AND START _0371972 VACUUM SENSOR ASSEMBLY A

STOP AND START  VACUUM SENSOR ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 1.INSTALL VACUUM SENSOR GROMMET

a.

Install a new vacuum sensor grommet to the brake booster assembly.


Hide 89420H 2.INSTALL VACUUM SENSOR ASSEMBLY

a.
A434542C01
0.115,0.104 0.427,0.26 0.313,0.156 10 true *A 0.167,2.552 0.479,2.708 0.313,0.156 10 true *B 1.083,2.052 1.385,2.25 0.302,0.198 10 true 20° 1.573,2.063 1.875,2.26 0.302,0.198 10 true 20° 2.958,3.729 3.26,3.927 0.302,0.198 10 false 45° 1.781,1.177 2.083,1.375 0.302,0.198 10 true 90°
*A for LHD
*B for RHD


Install the vacuum sensor assembly to the brake booster assembly so that the vacuum sensor assembly is angled as shown in the illustration.


b.

Connect the connector to the vacuum sensor assembly.