87510L
1.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH (for LHD, w/o Climate Control Seat System)
| *a | Connector A |
| *b | Connector B |
| *c | Component without harness connected
(Front Seat Cushion Heater Assembly LH) |
Check the resistance.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
If the result is not as specified, replace the front seat cushion heater assembly LH. |
||
| A-2 - B-2 | Always 20°C (68°F) | 1.6 to 1.9 Ω |
| A-3 - B-1 | 2.9 to 3.4 Ω | |
87510L
2.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH (for LHD, w/ Climate Control Seat System)
Check the resistance.
Measure the resistance according to the value(s) in the table below.
| *a | Connector A | *b | Connector B |
| *c | Component without harness connected
(Front Seat Cushion Heater Assembly LH) |
- | - |
for Standard Seat Type:
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| A-1 - A-2 | Always 20°C (68°F) | 4.6 to 5.5 Ω |
| A-1 - A-6 | ||
| A-1 - B-2 |
for Sports Seat Type:
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| A-1 - A-2 | Always 20°C (68°F) | 5.0 to 6.1 Ω |
| A-1 - A-6 | ||
| A-1 - B-2 |
If the result is not as specified, replace the front seat cushion heater assembly LH.
87510K
3.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH (for RHD, w/o Climate Control Seat System)
| *a | Connector A |
| *b | Connector B |
| *c | Component without harness connected
(Front Seat Cushion Heater Assembly RH) |
Check the resistance.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
If the result is not as specified, replace the front seat cushion heater assembly RH. |
||
| A-2 - B-2 | Always 20°C (68°F) | 1.6 to 1.9 Ω |
| A-3 - B-1 | 2.9 to 3.4 Ω | |
87510K
4.INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH (for RHD, w/ Climate Control Seat System)
Check the resistance.
Measure the resistance according to the value(s) in the table below.
| *a | Connector A | *b | Connector B |
| *c | Component without harness connected
(Front Seat Cushion Heater Assembly RH) |
- | - |
for Standard Seat Type:
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| A-1 - A-2 | Always 20°C (68°F) | 4.6 to 5.5 Ω |
| A-1 - A-6 | ||
| A-1 - B-2 |
for Sports Seat Type:
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| A-1 - A-2 | Always 20°C (68°F) | 5.0 to 6.1 Ω |
| A-1 - A-6 | ||
| A-1 - B-2 |
If the result is not as specified, replace the front seat cushion heater assembly RH.