71611
1.INSPECT REAR SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR)
for LH:
| *a | Component without harness connected
(Rear Seat Cushion Pad (Occupant Detection Sensor)) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
If the result is not as specified, replace the rear seat cushion pad (occupant detection sensor). |
||
| 1 - 3 | LH seat occupied | Below 100 Ω |
| 1 - 3 | LH seat not occupied | 1 MΩ or higher |
for CENTER:
| *a | Component without harness connected
(Rear Seat Cushion Pad (Occupant Detection Sensor)) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
If the result is not as specified, replace the rear seat cushion pad (occupant detection sensor). |
||
| 1 - 2 | CENTER seat occupied | Below 100 Ω |
| 1 - 2 | CENTER seat not occupied | 1 MΩ or higher |
for RH:
| *a | Component without harness connected
(Rear Seat Cushion Pad (Occupant Detection Sensor)) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
If the result is not as specified, replace the rear seat cushion pad (occupant detection sensor). |
||
| 1 - 3 | RH seat occupied | Below 100 Ω |
| 1 - 3 | RH seat not occupied | 1 MΩ or higher |