17572B
1.INSTALL NO. 2 EXHAUST PIPE SUPPORT BRACKET
Install the No. 2 exhaust pipe support bracket to the front frame assembly with the 2 bolts.
48069
2.INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH
Install the front lower arm bushing stopper to the front lower No. 1 suspension arm sub-assembly.
Install the front lower No. 1 suspension arm sub-assembly to the front frame assembly with the 3 bolts and nut in the order shown in the illustration.
Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut secured.
48068
3.INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH
Perform the same procedure as for the LH side.
44250
4.INSTALL RACK AND PINION POWER STEERING GEAR ASSEMBLY
5.INSTALL FRONT STABILIZER BAR WITH BRACKET
51100H
6.INSTALL FRONT FRAME ASSEMBLY
Install the rear engine mounting insulator to the front frame assembly with the 4 nuts.
Install the front engine mounting insulator to the front frame assembly with the 3 nuts.
7.CONNECT WIRE HARNESS
for LHD:
Click hereSteering>STEERING GEAR / LINKAGE>STEERING GEAR>INSTALLATION
for RHD:
Click hereSteering>STEERING GEAR / LINKAGE>STEERING GEAR>INSTALLATION
45319
8.INSTALL STEERING GEAR HEAT INSULATOR (for LHD)
9.REMOVE ENGINE HANGERS
23825
10.INSTALL FUEL DELIVERY GUARD
11.INSTALL ENGINE ASSEMBLY WITH TRANSAXLE