1.INSTALL AUXILIARY BATTERY
w/ No. 1 Battery Spacer:
Install the No. 1 battery spacer.
Install the auxiliary battery.
Install the battery insulator.
Install the battery clamp sub-assembly with the bolt and nut.
Connect the battery hose to the auxiliary battery.
Connect the cable to the positive (+) auxiliary battery terminal and tighten the nut.
Attach the 2 claws to close the connector cover.
2.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Connect the cable to the negative (-) auxiliary battery terminal and tighten the nut.
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
65351A
3.INSTALL BATTERY HOLE COVER
Attach the 12 claws and install the battery hole cover.
58416K
4.INSTALL REAR NO. 2 FLOOR BOARD
Attach the 2 clips and 2 guides and install the rear No. 2 floor board.
58410B
5.INSTALL DECK BOARD ASSEMBLY
Install the deck board assembly.