Home › General › MAINTENANCE › M20A-FKS BATTERY
RM3620E _V1 General _076298 MAINTENANCE _0372244 M20A-FKS BATTERY A

MAINTENANCE  M20A-FKS BATTERY  INSTALLATION  


PROCEDURE

Hide 28800 1.INSTALL BATTERY

a.

Install the battery to the vehicle.


b.
A431115C01
0,0 0,0 false

Install the No. 2 battery clamp with the bolt to the battery clamp sub-assembly.

Torque:
18.5 N*m (189 kgf*cm, 14 ft.*lbf)


c.

Connect the cable to the positive (+) battery terminal and tighten the nut.

Torque:
5.0 N*m (51 kgf*cm, 44 in.*lbf)


d.

Attach the 2 claws to install the connector cover to the positive (+) battery terminal.


Hide 2.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

a.

Connect the cable to the negative (-) battery terminal and tighten the nut.

Torque:
w/o Stop And Start System : 5.0 N*m (51 kgf*cm, 44 in.*lbf)
w/ Stop And Start System : 5.4 N*m (55 kgf*cm, 48 in.*lbf)

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION