Home › Drivetrain › UB80F (AUTOMATIC TRANSMISSION / TRANSAXLE) › SHIFT LEVER KNOB
RM3620E _52 Drivetrain _076123 UB80F AUTOMATIC TRANSMISSION / TRANSAXLE _0372286 SHIFT LEVER KNOB A

UB80F AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER KNOB  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 33504F 1.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

a.
C402725

Disengage the 2 claws to disconnect the shifting hole cover sub-assembly as shown in the illustration.


b.
C402727C01
0.823,1.417 1,1.25 1,1.25 1.167,1.25 true 1.833,1.917 2,1.917 2,1.917 2.281,1.146 true 1.208,1.167 1.375,1.333 0.167,0.167 10 false *a 1.625,1.833 1.792,2 0.167,0.167 10 true *b
*a Clip
*b Protective Tape


Using a screwdriver with its tip wrapped with protective tape, expand the left side of the clip and remove the shift lever knob sub-assembly from the transmission floor shift assembly as shown in the illustration.

NOTICE:

Be careful not to damage the shift lever knob sub-assembly.