Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PANORAMIC VIEW MONITOR SYSTEM(for HV Model)
RM3620E _56 Audio / Visual / Telematics _076129 PARK ASSIST / MONITORING _0370839 PANORAMIC VIEW MONITOR SYSTEM(for HV Model) U

PARK ASSIST / MONITORING  PANORAMIC VIEW MONITOR SYSTEM(for HV Model)  TERMINALS OF ECU  


PARKING ASSIST ECU


E326732N10
3.146,0.198 3.656,0.438 0.51,0.24 4.573,0.208 5.083,0.448 0.51,0.24 3.271,0.24 3.885,0.438 0.615,0.198 10 false N24 4.698,0.25 5.313,0.448 0.615,0.198 10 false N25

a.

Disconnect the N25 parking assist ECU connector.


b.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
N25-1 (+B) - N25-4 (GND1) L - LA Power source signal Power switch off 11 to 14 V
N25-4 (GND1) - Body ground LA - Body ground Ground Always Below 1 Ω
N25-3 (IG) - N25-4 (GND1) BE - LA IG power source signal Power switch on (IG) 11 to 14 V
Power switch off Below 1 V
N25-2 (ACC) - N25-4 (GND1) GR - LA ACC power source signal Power switch on (ACC) 11 to 14 V
Power switch off Below 1 V


c.

Reconnect the N25 parking assist ECU connector.


d.

Measure the voltage, resistance and waveform according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
N24-6 (RSW+) - N25-4 (GND1) BE - LA Terminal required by law Panoramic image being displayed 0 to 2 V
Panoramic image not being displayed 5.5 to 7.05 V
N24-7 (NS+) - N24-24 (NS-) B - W Video signal Power switch on (IG), panoramic view monitor switch on, camera lens not covered, displaying image Pulse generation (See waveform 3)
N24-8 (NSG) - Body ground BR - Body ground Shield ground Always Below 1 Ω
N24-10 (LCV+) - N24-35 (LGND) W - G Side television camera assembly LH display signal input Power switch on (IG), panoramic view monitor switch on, camera lens not covered, displaying image Pulse generation (See waveform 1)
Power switch on (IG), panoramic view monitor switch on, camera lens covered, blacking out screen Pulse generation (See waveform 2)
N24-11 (SGND) - Body ground BR - Body ground Side television camera assembly LH ground (shield) Always Below 1 Ω
N24-12 (LCB+) - N24-35 (LGND) B - G Power source to side television camera assembly LH Power switch on (IG) 5.5 to 7.05 V
N24-13 (BCV-) - N24-37 (BGND) W - R Front television camera assembly display ground Always Below 1 Ω
N24-14 (SGND) - Body ground BR - Body ground Front television camera assembly ground (shield) Always Below 1 Ω
N24-15 (BCB+) - N24-37 (BGND) G - R Power source to front television camera Power switch on (IG) 5.5 to 7.05 V
N24-16 (RCV-) - N24-17 (RGND) R - G Side television camera assembly RH display ground Always Below 1 Ω
N24-17 (RGND) - Body ground G - Body ground Side television camera assembly RH display ground Always Below 1 Ω
N24-24 (NS-) - N25-4 (GND1) W - LA Video ground Always Below 1 Ω
N24-29 (CV+) - N24-32 (CGND) B - G Television camera assembly display signal input Power switch on (IG), panoramic view monitor switch on, camera lens not covered, displaying image Pulse generation (See waveform 1)
Power switch on (IG), panoramic view monitor switch on, camera lens covered, blacking out screen Pulse generation (See waveform 2)
N24-30 (CV-) - N24-32 (CGND) W - G Television camera assembly display ground Always Below 1 Ω
N24-31 (SGND) - Body ground B - Body ground Television camera assembly ground (shield) Always Below 1 Ω
N24-32 (CGND) - Body ground G - Body ground Television camera assembly ground Always Below 1 Ω
N24-33 (CB+) - N24-32 (CGND) R - G Power source to television camera assembly Power switch on (IG) 5.5 to 7.05 V
N24-34 (LCV-) - N24-35 (LGND) R - G Side television camera assembly LH display ground Always Below 1 Ω
N24-35 (LGND) - Body ground G - Body ground Side television camera assembly LH ground Always Below 1 Ω
N24-36 (BCV+) - N24-37 (BGND) B - R Front television camera assembly display signal input Waveform 1: Power switch on (IG), panoramic view monitor switch on, camera lens not covered, displaying image Pulse generation (See waveform 1)
Waveform 2: Power switch on (IG), panoramic view monitor switch on, camera lens covered, blacking out screen Pulse generation (See waveform 2)
N24-37 (BGND) - Body ground R - Body ground Front television camera assembly display ground Always Below 1 Ω
N24-38 (RCV+) - N24-17 (RGND) W - G Side television camera assembly RH display signal input Waveform 1: Power switch on (IG), panoramic view monitor switch on, camera lens not covered, displaying image Pulse generation (See waveform 1)
Waveform 2: Power switch on (IG), panoramic view monitor switch on, camera lens covered, blacking out screen Pulse generation (See waveform 2)
N24-39 (SGND) - Body ground BR - Body ground Side television camera assembly RH ground (shield) Always Below 1 Ω
N24-40 (RCB+) - N24-17 (RGND) B - G Power source to side television camera assembly RH Power switch on (IG) 5.5 to 7.05 V
N25-11 (CANH) GR CAN communication line - -
N25-12 (CANL) W CAN communication line - -
N25-15 (BLSW) - N25-4 (GND1) G - LA Panoramic view monitor switch signal Power switch on (IG), panoramic view monitor switch off 5.5 to 6.5 V
Power switch on (IG), panoramic view monitor switch on Below 1 V
N25-16 (MPOS) - N25-4 (GND1)* L - LA Outer rear view mirror status signal input Power switch on (IG), retractable outer mirror switch on Below 1 V
Power switch on (IG), retractable mirror switch off 11 to 14 V

*: w/ Retract Mirror (w/o Auto Power Retract Mirror)



e.

Using an oscilloscope, check the waveform.

E254326C01
0.917,1.5 1.417,1.5 1.417,1.5 1.469,1.354 false 0.917,1.667 1.49,1.667 1.49,1.667 1.563,1.313 false 4.25,1.417 4.75,1.417 4.75,1.417 4.833,1.198 false 4.24,1.688 4.813,1.688 4.813,1.688 4.948,1.146 false 0.76,0.823 1.219,1.021 0.458,0.198 10 GND 4.031,0.823 4.49,1.021 0.458,0.198 10 GND 0.438,0.083 0.75,0.281 0.313,0.198 10 *a 3.771,0.083 4.083,0.281 0.313,0.198 10 *b 0.75,1.417 1.063,1.615 0.313,0.198 10 *c 0.75,1.604 1.031,1.76 0.281,0.156 10 *d 4.083,1.344 4.333,1.5 0.25,0.156 10 *c 4.073,1.625 4.292,1.771 0.219,0.146 10 *d
*a Waveform 1 *b Waveform 2
*c Synchronization Signal *d Video Waveform


i.

Waveform 1, 2

Measurement Condition
Item Content
Terminal No. (Symbol)
·

N24-10 (LCV+) - N24-35 (LGND)

·

N24-29 (CV+) - N24-32 (CGND)

·

N24-36 (BCV+) - N24-37 (BGND)

·

N24-38 (RCV+) - N24-17 (RGND)


Tool Setting 200 mV/DIV., 50 μsec./DIV.
Condition
·

Waveform 1: Power switch on (IG), panoramic view monitor switch on, camera lens not covered, displaying image

·

Waveform 2: Power switch on (IG), panoramic view monitor switch on, camera lens covered, blacking out screen



HINT:
·

The video waveform changes according to the image sent by the television camera assembly.

·

The video waveform is constantly output when the power switch is on (ACC).




ii.
E336160C01
1.115,2.26 1.01,2.833 1.01,2.833 0.896,2.833 false 1.25,2.135 1.406,2.854 1.406,2.854 1.583,2.854 false 0.229,0.313 0.542,0.51 0.313,0.198 10 false *a 0.271,1.594 0.688,1.792 0.417,0.198 10 false GND 1.625,2.771 1.938,2.969 0.313,0.198 10 false *c 0.698,2.74 1.01,2.938 0.313,0.198 10 false *b
*a Waveform 3 (camera lens is not covered, displaying an image)
*b Synchronization Signal
*c Video Waveform


Waveform 3

Item Content
Measurement terminal N24-7 (NS+) - N24-24 (NS-)
Measurement setting 200 mV/DIV., 50 μs./DIV.
Condition Power switch on (IG), panoramic view monitor switch on, camera lens not covered, displaying image

HINT:

The video waveform changes according to the image sent by the parking assist ECU.





RADIO AND DISPLAY RECEIVER ASSEMBLY (w/ Audio and Visual System)


Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM (for Radio and Display Type)>TERMINALS OF ECU


RADIO AND DISPLAY RECEIVER ASSEMBLY (w/ Navigation System)


Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>TERMINALS OF ECU