Home › Engine / Hybrid System › A25A-FKS (EMISSION CONTROL) › VACUUM SENSOR
RM3620E _51 Engine / Hybrid System _076502 A25A-FKS EMISSION CONTROL _0372398 VACUUM SENSOR A

A25A-FKS EMISSION CONTROL  VACUUM SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 89421 1.REMOVE E.F.I. VACUUM SENSOR ASSEMBLY (MANIFOLD ABSOLUTE PRESSURE SENSOR)

a.
A433188

Disconnect the E.F.I. vacuum sensor assembly (manifold absolute pressure sensor) connector.


b.

Disconnect the vacuum hose from the E.F.I. vacuum sensor assembly (manifold absolute pressure sensor).


c.

Using an 8 mm socket wrench, remove the bolt and E.F.I. vacuum sensor assembly (manifold absolute pressure sensor) from the intake manifold.