Home › Engine / Hybrid System › A25A-FKS (EMISSION CONTROL) › PURGE VALVE(w/ Canister Pump Module)
RM3620E _51 Engine / Hybrid System _076502 A25A-FKS EMISSION CONTROL _0372401 PURGE VALVE(w/ Canister Pump Module) A

A25A-FKS EMISSION CONTROL  PURGE VALVE(w/ Canister Pump Module)  INSTALLATION  


PROCEDURE

Hide 25860 1.INSTALL PURGE VALVE (PURGE VSV)

a.
A401946C02
2,1.385 2,1.719 true 1.354,1.344 0.802,1.344 true 1.448,0.844 0.896,0.844 true 1.917,1.719 2.115,1.927 0.198,0.208 10 true *1 0.625,1.271 0.844,1.469 0.219,0.198 10 true *2 1.063,2.542 1.375,2.698 0.313,0.156 10 false *a 0.26,3.49 0.521,3.698 0.26,0.208 10 false *b 0.667,2.823 0.906,3.052 0.24,0.229 10 false *c 1.729,3.594 1.979,3.781 0.25,0.188 10 false *d 0.688,0.729 0.906,0.927 0.219,0.198 10 true *3
*1 No. 1 Fuel Vapor Feed Hose
*2 No. 2 Fuel Vapor Feed Hose
*3 Purge Valve (Purge VSV)
*a Up
*b Front
*c 120° (Clip tab area)
*d 2 to 7 mm (0.0787 to 0.276 in.)


Install the purge valve (purge VSV) to the purge VSV bracket with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Connect the No. 2 fuel vapor feed hose to the purge valve (purge VSV).


c.

Connect the No. 1 fuel vapor feed hose to the purge valve (purge VSV) and slide the clip to secure it.

HINT:

Engage the clip within the area shown in the illustration.



d.

Connect the purge valve (purge VSV) connector.