Home › Engine / Hybrid System › A25A-FXS (EMISSION CONTROL) › FUEL VAPOR CONTAINMENT VALVE (w/ Canister Pump Module)
RM3620E _51 Engine / Hybrid System _076503 A25A-FXS EMISSION CONTROL _0372422 FUEL VAPOR CONTAINMENT VALVE(w/ Canister Pump Module) G

A25A-FXS EMISSION CONTROL  FUEL VAPOR CONTAINMENT VALVE(w/ Canister Pump Module)  INSPECTION  


PROCEDURE

Hide 77710B 1.INSPECT FUEL VAPOR CONTAINMENT VALVE (FUEL TANK SOLENOID MAIN VALVE ASSEMBLY)

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 25 to 30 Ω


If the result is not as specified, replace the fuel vapor containment valve (fuel tank solenoid main valve assembly).