Home › Vehicle Exterior › SLIDING ROOF / CONVERTIBLE › PANORAMIC MOON ROOF SYSTEM
RM3620E _59 Vehicle Exterior _076526 SLIDING ROOF / CONVERTIBLE _0372466 PANORAMIC MOON ROOF SYSTEM W

SLIDING ROOF / CONVERTIBLE  PANORAMIC MOON ROOF SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE PANORAMIC MOON ROOF SYSTEM


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make notes of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



HINT:

The following items can be customized.


a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Power Window.


v.

Select the setting by referring to the table below.

Power Window
Tester Display Description Default Setting ECU
Door Key P/W Up Function to close the power windows and sliding roof using the mechanical key OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
Door Key P/W Down Function to open the power windows and sliding roof using the mechanical key OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
P/W Up W/ Transmit Function to close the power windows and sliding roof using the wireless transmitter OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
P/W Down W/ Transmit Function to open the power windows and sliding roof using the wireless transmitter OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
50006 4

vi.

Enter the following menus: Customize Setting / Slide Roof.


vii.

Select the setting by referring to the table below.

Slide Roof
Tester Display Description Default Setting ECU
Front SW Auto Operation This function is used to enable or disable auto operation function. ON 0:OFF,1:ON Sliding roof ECU (Sliding roof drive gear assembly [Sliding roof])
50006 10

viii.

Enter the following menus: Customize Setting / Security.


ix.

Select the setting by referring to the table below.

Security
Tester Display Description Default Setting ECU
Slide Roof Open Warning This function is used to enable or disable the sliding roof open warning. ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
50006 3