If the forward recognition camera has been replaced with a new one or the windshield glass has been removed and installed, it is necessary to perform forward recognition camera adjustment.
Forward recognition camera adjustment can be performed by using either "One Time Recognition" or "Sequential Recognition".
One Time Recognition:
Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (ONE TIME RECOGNITION)
Sequential Recognition:
Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (SEQUENTIAL RECOGNITION)
When replacing the windshield glass equipped with the forward recognition camera, be sure to replace it with a genuine windshield glass for the forward recognition camera. A windshield glass other than a genuine windshield glass for the forward recognition camera does not have a camera installation bracket. Therefore, the forward recognition camera cannot be installed. If the forward recognition camera is mounted on a windshield glass that is not a genuine windshield glass for the forward recognition camera, the systems using the forward recognition camera may not operate properly because of the transmittance of the windshield glass and the shape of black ceramic parts.
STORE RECOGNITION CAMERA/TARGET POSITIONS
The purpose of this Utility is to raise the recognition accuracy of the camera by calibrating the internal data derived from the "Recognition Camera/Target Position Memory" of the forward recognition camera.
According to the display on the GTS, perform "Recognition Camera/Target Position Memory".
| Tester Display |
|---|
| Recognition Camera/Target Position Memory |
For the procedure, refer to the forward recognition camera adjustment.
Forward recognition camera adjustment can be performed by using either "One Time Recognition" or "Sequential Recognition".
One Time Recognition:
Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (ONE TIME RECOGNITION)
Sequential Recognition:
Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (SEQUENTIAL RECOGNITION)
BEAM AXIS LEARNING
The purpose of this Utility is to make the forward recognition camera store the information necessary to perform "Recognition Camera Axis Adjust".
According to the display on the GTS, perform "Recognition Camera Axis Adjust".
| Tester Display |
|---|
| Recognition Camera Axis Adjust |
For the procedure, refer to the forward recognition camera adjustment.
Forward recognition camera adjustment can be performed by using either "One Time Recognition" or "Sequential Recognition".
One Time Recognition:
Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (ONE TIME RECOGNITION)
Sequential Recognition:
Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (SEQUENTIAL RECOGNITION)