| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U010087 | Lost Communication with ECM/PCM "A" Missing Message | While the vehicle is being driven at 1 km/h or 1 mph or more, a communication error between the ECM and the forward recognition camera is detected for approximately 5 seconds or more. | ·
ECM ·
CAN communication system ·
Forward recognition camera |
| U012587 | Lost Communication with Multi-axis Acceleration Sensor Module Missing Message | 3 seconds after the ignition switch is turned to ON, while the vehicle is being driven at 1 km/h or 1 mph or more, a communication error between the airbag sensor assembly and the forward recognition camera is detected for approximately 5 seconds or more. | ·
Airbag sensor assembly ·
CAN communication system ·
Forward recognition camera |
| U012687 | Lost Communication with Steering Angle Sensor Module Missing Message | 3 seconds after the ignition switch is turned to ON, a communication error between the steering sensor and the forward recognition camera is detected for approximately 5 seconds or more. | ·
Steering sensor ·
CAN communication system ·
Forward recognition camera |
| U012987 | Lost Communication with Brake System Control Module Missing Message | for HV Model:
3 seconds after the ignition switch is turned to ON, a communication error between the brake booster with master cylinder assembly (skid control ECU) and the forward recognition camera is detected for approximately 5 seconds or more. for Gasoline Model:
3 seconds after the ignition switch is turned to ON, a communication error between the brake actuator assembly (skid control ECU) and the forward recognition camera is detected for approximately 5 seconds or more. |
for HV Model:
·
Brake booster with master cylinder assembly (skid control ECU) ·
CAN communication system ·
Forward recognition camera for Gasoline Model:
·
Brake actuator assembly (skid control ECU) ·
CAN communication system ·
Forward recognition camera |
| U014087 | Lost Communication with Body Control Module Missing Message | 3 seconds after the ignition switch is turned to ON, a communication error between the main body ECU (multiplex network body ECU) and the front steering control ECU is detected for approximately 5 seconds or more. | ·
Main body ECU (multiplex network body ECU) ·
CAN communication system ·
Forward recognition camera |
| U029387 | Lost Communication with Hybrid Powertrain Control Module Missing Message | While the vehicle is being driven at 1 km/h or 1 mph or more, a communication error between the hybrid vehicle control ECU assembly and the forward recognition camera is detected for approximately 5 seconds or more. | ·
Hybrid vehicle control ECU assembly ·
CAN communication system ·
Forward recognition camera |
Clear the DTCs.
Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA SYSTEM>DTC CHECK / CLEAR
Make sure that the DTC detection conditions are met.
If the detection conditions are not met, the system cannot detect the malfunction.
Recheck for DTCs and check that no DTCs are output.
Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA SYSTEM>DTC CHECK / CLEAR
DTCs U010087, U012587, U012687, U012987, U014087 and U029387 are not output.
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
NG
for HV Model:
for Gasoline Model: