Home › Drivetrain › EG62F (MANUAL TRANSMISSION / TRANSAXLE) › MANUAL TRANSAXLE SYSTEM
RM3620E _52 Drivetrain _076271 EG62F MANUAL TRANSMISSION / TRANSAXLE _0372179 MANUAL TRANSAXLE SYSTEM L

EG62F MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSAXLE SYSTEM  PRECAUTION  


PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL


NOTICE:

When disconnecting the cable from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION



PRECAUTION


HINT:
·

The iMT system may not detect a gear change after a certain amount of time has elapsed between the clutch operation and shift lever operation or when the shift lever is operated after coasting with the shift lever in neutral.

·

The speed synchronization operation can be performed for a certain amount of time by operating the shift lever after the clutch pedal is depressed. After a certain amount of time elapses with the clutch pedal depressed, it must be released and depressed again before the speed synchronization operation can be performed again.

·

The iMT system may not operate if the clutch pedal is not completely released or fully depressed.

·

If shift lever operation and clutch engagement are performed in quick succession, the speed synchronization operation of the iMT system may not be performed.

·

If the engine control system or brake control system malfunctions, the iMT system may stop operating.