Home › Drivetrain › EG62F (MANUAL TRANSMISSION / TRANSAXLE) › MANUAL TRANSAXLE SYSTEM
RM3620E _52 Drivetrain _076271 EG62F MANUAL TRANSMISSION / TRANSAXLE _0372179 MANUAL TRANSAXLE SYSTEM U

EG62F MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSAXLE SYSTEM  TERMINALS OF ECM  


ECM


C398924E02
5.542,0.25 5.958,0.5 0.417,0.25 1.75,0.25 2.167,0.5 0.417,0.25 5.635,0.302 6.094,0.5 0.458,0.198 10 false A24 1.833,0.302 2.292,0.5 0.458,0.198 10 false C40

HINT:

The standard voltage and resistance between each pair of ECM terminals is shown in the table below.

The appropriate conditions for checking each pair of terminals are also indicated. The result of checks should be compared with the standard voltage or resistance for that pair of terminals shown in the "Specified Condition" column.

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A24-11 (CLS) - A24-20 (E2CL) R - V Clutch pedal stroke sensor assembly signal Ignition switch ON, clutch pedal fully released 0.96 to 1.04 V
·

Ignition switch ON

·

Not depressed → Fully depressed (Clutch pedal should be operated slowly)


Value changes progressively (Only increase)
A24-19 (VCCL) - A24-20 (E2CL) GR - V Power source of clutch pedal stroke sensor assembly Ignition switch ON 4.5 to 5.5 V
A24-38 (MTMS) - A24-10 (E1) V - W-B iMT switch (integration control and panel assembly) signal Ignition switch ON, iMT switch (integration control and panel assembly) being pushed Below 1.5 V
Ignition switch ON, iMT switch (integration control and panel assembly) not being pushed 11 to 14 V