Home › Vehicle Interior › SEAT › REAR SEAT CUSHION HEATER
RM3620E _58 Vehicle Interior _076405 SEAT _0372030 REAR SEAT CUSHION HEATER G

SEAT  REAR SEAT CUSHION HEATER  INSPECTION  


PROCEDURE

Hide 87510Q 1.INSPECT REAR SEAT CUSHION HEATER ASSEMBLY LH

a.
B531877C01
1.615,0.385 1.927,0.542 0.313,0.156 10 false *a 1.625,1.917 1.938,2.073 0.313,0.156 10 false *b 0.115,0.094 0.427,0.25 0.313,0.156 10 false *c
*a Connector A
*b Connector B
*c Component without harness connected
(Rear Seat Cushion Heater Assembly LH)


Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

If the result is not as specified, replace the rear seat cushion heater assembly LH.

A-3 - B-2 Always 20°C (68°F) 1.6 to 1.9 Ω
A-3 - B-1 3.4 to 4.1 Ω




Hide 87510P 2.INSPECT REAR SEAT CUSHION HEATER ASSEMBLY RH

a.
B531877C01
1.615,0.385 1.927,0.542 0.313,0.156 10 false *a 1.625,1.917 1.938,2.073 0.313,0.156 10 false *b 0.115,0.094 0.427,0.25 0.313,0.156 10 false *c
*a Connector A
*b Connector B
*c Component without harness connected
(Rear Seat Cushion Heater Assembly RH)


Check the resistance.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition

If the result is not as specified, replace the rear seat cushion heater assembly RH.

A-3 - B-2 Always 20°C (68°F) 1.6 to 1.9 Ω
A-3 - B-1 3.4 to 4.1 Ω