Home › Vehicle Interior › POWER OUTLETS (INT) › WIRELESS CHARGING SYSTEM
RM3620E _58 Vehicle Interior _076279 POWER OUTLETS (INT) _0371450 WIRELESS CHARGING SYSTEM U

POWER OUTLETS (INT)  WIRELESS CHARGING SYSTEM  TERMINALS OF ECU  


CHECK MOBILE WIRELESS CHARGER CRADLE ASSEMBLY


E216115E14
3.365,0.156 3.781,0.406 0.417,0.25 3.448,0.198 3.792,0.365 0.344,0.167 10 false G13

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G13-1 (PGND) - Body ground LA - Body ground Ground Always Below 1 Ω
G13-5 (ACC) - G13-1 (PGND) B - LA*1
BE - LA*2
Power source (ACC) Ignition switch ACC 11 to 14 V
Ignition switch off Below 1 V
G13-6 (B+) - G13-1 (PGND) LA-L - LA*1
LA-R - LA*2
Power source (+B) Ignition switch off 11 to 14 V
G13-7 (DIS) - Body ground LG - Body ground Charging suspension signal For 5 seconds after turning ignition switch from off to ACC*3 4.5 to 6.0 V
Device being charged Below 1 V
Charging suspended due to entry and start system status*4 4.5 to 6.0 V
G13-8 (SDET) - Body ground*5 LA - Body ground Ground Always Below 1 Ω
G13-9 (ILL-) - Body ground*6 L - Body ground Illumination (rheostat) signal Light control switch in off position Below 1 V
Light control switch in tail or head position Pulse generation
G13-10 (TAIL) - Body ground R - Body ground*1
GR - Body ground*2
Illumination signal Light control switch in off position Below 1 V
Ignition switch off, light control switch in tail or head position 11 to 14 V

*1: for Manual Transaxle

*2: except Manual Transaxle

*3: When the ignition switch is turned from off to ACC, the mobile wireless charger cradle assembly monitors the charging suspension signal for 5 seconds. If the charging suspension signal is not 4 V or more for 0.8 seconds or more during monitoring, the mobile wireless charger cradle assembly determines that there is an open in the charging suspension signal line, blinks (pattern 1) the indicator light (amber), and prohibits operation until the ignition switch is turned from off to ACC again.

*4: For details about conditions when the certification ECU (smart key ECU assembly) sends the charging suspension signal, refer to System Description.

Click hereVehicle Interior>POWER OUTLETS (INT)>WIRELESS CHARGING SYSTEM>SYSTEM DESCRIPTION

*5: w/o Light Control Rheostat

*6: w/ Light Control Rheostat