Home › Engine / Hybrid System › A25A-FKS (ENGINE CONTROL) › ACTIVE CONTROL ENGINE MOUNT (for Rear Side)
RM3620E _51 Engine / Hybrid System _076382 A25A-FKS ENGINE CONTROL _0373073 ACTIVE CONTROL ENGINE MOUNT(for Rear Side) A

A25A-FKS ENGINE CONTROL  ACTIVE CONTROL ENGINE MOUNT(for Rear Side)  INSTALLATION  


PROCEDURE

Hide 12371A 1.INSTALL REAR ENGINE MOUNTING INSULATOR

a.

Attach the clamp and install the vacuum hose to the rear engine mounting insulator.


b.

Install the wire harness clamp bracket to the rear engine mounting insulator with the bolt.

Torque:
13 N*m (133 kgf*cm, 10 ft.*lbf)


c.
A432654C01
0.938,1.24 0.938,0.906 true 1.302,1.156 1.302,0.885 true 2.542,1.333 2.542,0.792 true 2.271,1.583 2.271,1.208 true 1.292,0.281 1.083,0.281 1.083,0.281 1.083,0.729 true 0.875,1.271 1.063,1.49 0.188,0.219 10 false *1 2.208,1.604 2.385,1.792 0.177,0.188 10 false *2 1.229,1.188 1.427,1.427 0.198,0.24 10 false *a 2.479,1.354 2.667,1.583 0.188,0.229 10 false *b 1.333,0.198 1.521,0.396 0.188,0.198 10 false *b
*1 Rear Engine Mounting Bracket
*2 Rear Engine Mounting Insulator
*a Protrusion
*b Hole


Align the hole of the rear engine mounting insulator with the protrusion of the rear engine mounting bracket, slide the rear engine mounting insulator onto the rear engine mounting bracket to align the holes and install the rear engine mounting insulator with the bolt.

Torque:
72 N*m (734 kgf*cm, 53 ft.*lbf)