Home › Engine / Hybrid System › A25A-FKS (ENGINE CONTROL) › CAMSHAFT POSITION SENSOR
RM3620E _51 Engine / Hybrid System _076382 A25A-FKS ENGINE CONTROL _0373077 CAMSHAFT POSITION SENSOR A

A25A-FKS ENGINE CONTROL  CAMSHAFT POSITION SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 12601B 1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 11102A 2.REMOVE CAMSHAFT POSITION SENSOR (for Intake Side)

a.
A432669

Disconnect the camshaft position sensor connector.


b.

Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

NOTICE:

If the camshaft position sensor has been struck or dropped, replace it.



Hide 11102A 3.REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side)

a.
A432670

Disconnect the camshaft position sensor connector.


b.

Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

NOTICE:

If the camshaft position sensor has been struck or dropped, replace it.