Home › Engine / Hybrid System › A25A-FKS (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR
RM3620E _51 Engine / Hybrid System _076382 A25A-FKS ENGINE CONTROL _0373080 ENGINE COOLANT TEMPERATURE SENSOR A

A25A-FKS ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.



PROCEDURE

Hide 89422A 1.INSTALL ENGINE COOLANT TEMPERATURE SENSOR

HINT:

Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.



a.

Apply a light coat of engine coolant to the O-ring of the engine coolant temperature sensor.


b.

Install the engine coolant temperature sensor to the water outlet with a new clip.

NOTICE:
·

If the engine coolant temperature sensor has been struck or dropped, replace it.

·

If reusing the engine coolant temperature sensor, be sure to inspect the O-ring.

·

Make sure that the O-ring is not cracked or moved out of place when installing the engine coolant temperature sensor.




c.

Connect the engine coolant temperature sensor connector.


Hide 28800 2.INSTALL BATTERY

Hide 3.ADD ENGINE COOLANT

Hide 4.INSPECT FOR COOLANT LEAK