Home › Engine / Hybrid System › M20A-FKS (FUEL) › FUEL PUMP ECU
RM3620E _51 Engine / Hybrid System _076682 M20A-FKS FUEL _0373204 FUEL PUMP ECU A

M20A-FKS FUEL  FUEL PUMP ECU  INSTALLATION  


PROCEDURE

Hide 89571 1.INSTALL FUEL PUMP CONTROL ECU

a.

Install the fuel pump control ECU bracket to the fuel pump control ECU with the 2 bolts.

Torque:
4.5 N*m (46 kgf*cm, 40 in.*lbf)


b.

Install the fuel pump control ECU to the body with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


c.

Connect the 2 connectors to the fuel pump control ECU.


Hide 64740E 2.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION