Home › Drivetrain › K120F (MULTIDRIVE / CVT) › CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM
RM3620E _52 Drivetrain _076273 K120F MULTIDRIVE / CVT _0372182 CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM U

K120F MULTIDRIVE / CVT  CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM  TERMINALS OF ECU  


TCM


C390209E01
3.198,0.167 3.698,0.417 0.5,0.25 3.323,0.219 3.781,0.417 0.458,0.198 10 false C33

HINT:

The standard voltage and resistance between each pair of TCM terminals is shown in the table below.

The appropriate conditions for checking each pair of terminals are also indicated. The result of checks should be compared with the standard voltage or resistance for that pair of terminals shown in the "Specified Condition" column.

Use the illustration above as a reference for the TCM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
C33-1 (+B) - C33-2 (E1) L - B Power source of TCM Ignition switch ON 11 to 14 V
C33-2 (E1) - Body ground B - Body ground Ground Always Below 1 Ω
C33-4 (SLS+) - C33-3 (SLS-) P - Y Shift solenoid valve SLS signal Engine idling Pulse generation
C33-6 (SLU+) - C33-5 (SLU-) L - G Shift solenoid valve SLU signal Lock-up turned from OFF to ON Pulse generation
C33-7 (NSSO) - C33-2 (E1) L - B Transmission revolution sensor (NSS) signal Vehicle being driven with shift lever in D Pulse generation
C33-8 (NC1O) - C33-2 (E1) R - B Transmission revolution sensor (NC1) signal Vehicle being driven in gear mode Pulse generation
C33-9 (NTO) - C33-2 (E1) V - B Transmission revolution sensor (NT) signal Vehicle being driven with shift lever in D Pulse generation
C33-10 (NOO) - C33-2 (E1) G - B Transmission revolution sensor (NOUT) signal Vehicle being driven with shift lever in D Pulse generation
C33-13 (SFTD) - C33-2 (E1) W - B Down-shift switch signal
·

Ignition switch ON

·

Shift lever in M


11 to 14 V
·

Ignition switch ON

·

Shift lever held in "-"


Below 1 V
C33-14 (SFTU) - C33-2 (E1) G - B Up-shift switch signal
·

Ignition switch ON

·

Shift lever in M


11 to 14 V
·

Ignition switch ON

·

Shift lever held in "+"


Below 1 V
C33-15 (CANH) - C33-2 (E1) GR - B CAN communication line Ignition switch ON Pulse generation
C33-16 (CANL) - C33-2 (E1) P - B CAN communication line Ignition switch ON Pulse generation
C33-17 (CAN-) - C33-2 (E1) L - B CAN communication line to ECM Ignition switch ON Pulse generation
C33-18 (CAN+) - C33-2 (E1) B - B CAN communication line to ECM Ignition switch ON Pulse generation
C33-19 (SL2+) - C33-20 (SL2-) GR - G Shift solenoid valve SL2 signal Vehicle being driven in belt mode Pulse generation
C33-21 (SLG+) - C33-22 (SLG-) R - L Shift solenoid valve SLG signal
·

Vehicle being driven in gear mode

·

Shift lever in P


Pulse generation
C33-23 (NSSB) - C33-2 (E1) P - B Power source of transmission revolution sensor (NSS) Ignition switch ON 11 to 14 V
C33-24 (NC1B) - C33-2 (E1) W - B Power source of transmission revolution sensor (NC1) Ignition switch ON 11 to 14 V
C33-25 (NTB) - C33-2 (E1) G - B Power source of transmission revolution sensor (NT) Ignition switch ON 11 to 14 V
C33-26 (NOB) - C33-2 (E1) R - B Power source of transmission revolution sensor (NOUT) Ignition switch ON 11 to 14 V
C33-28 (STA) - C33-2 (E1) G - B Starter assembly signal Cranking 6.0 V or higher
C33-29 (P) - C33-2 (E1) B - B P position switch signal
·

Ignition switch ON

·

Shift lever in P


11 to 14 V
·

Ignition switch ON

·

Shift lever not in P


Below 1 V
C33-30 (S) - C33-2 (E1) GR - B M position switch signal
·

Ignition switch ON

·

Shift lever in M


11 to 14 V
·

Ignition switch ON

·

Shift lever not in M


Below 1 V
C33-31 (D) - C33-2 (E1) G - B D position switch signal
·

Ignition switch ON

·

Shift lever in D


11 to 14 V
·

Ignition switch ON

·

Shift lever not in D


Below 1 V
C33-32 (N) - C33-2 (E1) L - B N position switch signal
·

Ignition switch ON

·

Shift lever in N


11 to 14 V
·

Ignition switch ON

·

Shift lever not in N


Below 1 V
C33-33 (R) - C33-2 (E1) W - B R position switch signal
·

Ignition switch ON

·

Shift lever in R


11 to 14 V
·

Ignition switch ON

·

Shift lever not in R


Below 1 V
C33-34 (STP) - C33-2 (E1) SB - B Stop light switch assembly signal Brake pedal depressed 7.5 to 14 V
Brake pedal released Below 1.5 V
C33-38 (SL1+) - C33-37 (SL1-) V - B Shift solenoid valve SL1 signal Vehicle being driven in gear mode Pulse generation
C33-40 (SLP+) - C33-39 (SLP-) LG - R Shift solenoid valve SLP signal Engine idling Pulse generation
C33-41 (IGSW) - C33-2 (E1) P - B Ignition switch signal Ignition switch ON 11 to 14 V
C33-42 (SPD) - C33-2 (E1) SB - B Vehicle speed signal from combination meter assembly Vehicle being driven at 20 km/h (12 mph) Pulse generation
C33-43 (NE) - C33-2 (E1) B - B Crankshaft position sensor signal from ECM Engine idling with warm engine Pulse generation
C33-45 (VCSF) - C33-44 (E2SF) G - L Power source of shift stroke sensor Ignition switch ON 4.5 to 5.5 V
C33-46 (SFV) - C33-44 (E2SF) W - L Shift stroke sensor signal Synchronizer engaged 1.19 to 1.29 V
Synchronizer not engaged 3.64 to 3.74 V
C33-49 (VCPT) - C33-48 (EPTO) L - B Power source of oil pressure sensor Ignition switch ON 4.5 to 5.5 V
C33-50 (PTO) - C33-48 (EPTO) G - B Oil pressure sensor signal Engine idling with shift lever in P 0.8 to 1.2 V
C33-51 (THO1) - C33-52 (ETHO) B - BR CVT fluid temperature sensor signal CVT fluid temperature: 60 to 120°C (140 to 248°F) 0.2 to 1.0 V


ECM


C398924E03
1.708,0.25 2.208,0.5 0.5,0.25 5.5,0.25 6,0.5 0.5,0.25 5.635,0.302 6.094,0.5 0.458,0.198 10 false A24 1.833,0.302 2.292,0.5 0.458,0.198 10 false C40

HINT:

The standard voltage and resistance between each pair of ECM terminals is shown in the table below.

The appropriate conditions for checking each pair of terminals are also indicated. The result of checks should be compared with the standard voltage or resistance for that pair of terminals shown in the "Specified Condition" column.

Use the illustration above as a reference for the ECM terminals.


Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition

*: w/ Shift Paddle Switch

A24-7 (CANP) - A24-10 (E1) B - W-B CAN communication line to TCM Ignition switch ON Pulse generation
A24-9 (+B) - A24-10 (E1) L - W-B Power source of ECM Ignition switch ON 11 to 14 V
A24-16 (NEO) - A24-10 (E1) BR - W-B Crankshaft position sensor signal to TCM Engine idling with warm engine Pulse generation
A24-17 (CANN) - A24-10 (E1) L - W-B CAN communication line to TCM Ignition switch ON Pulse generation
A24-28 (ECCS) - A24-10 (E1) BR - W-B Shift paddle switch ground* Always Below 1 Ω
A24-30 (STA) - A24-10 (E1) G - W-B Starter assembly signal Cranking 6.0 V or higher
A24-35 (+B2) - A24-10 (E1) L - W-B Power source of ECM Ignition switch ON 11 to 14 V