CHECK VEHICLE CONTROL HISTORY (CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM)
The Vehicle Control History stores the history of the reject function and system protection operations.
The number of occurrences, date and distance are stored in batches for each item.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Powertrain / Transmission / Utility / Vehicle Control History (RoB).
| Tester Display |
|---|
| Vehicle Control History (RoB) |
| Code | Tester Display | Measurement Item | Diagnostic Note |
|---|---|---|---|
| X090C | High A/T Oil Temperature | History of the CVT fluid temperature exceeding the threshold and a warning being output after starting the engine
(A shift pattern which prioritizes lower engine speed gear shift is used until the CVT fluid temperature drops, in order to protect the continuously variable transaxle assembly) |
- |
CLEAR VEHICLE CONTROL HISTORY (CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM)
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Powertrain / Transmission / Utility / Vehicle Control History (RoB) (Clear).
| Tester Display |
|---|
| Vehicle Control History (RoB) |
By performing this procedure, all stored Vehicle Control History will be cleared.
VEHICLE CONTROL HISTORY FREEZE FRAME DATA (CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM)
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Powertrain / Transmission / Utility / Vehicle Control History (RoB).
| Tester Display |
|---|
| Vehicle Control History (RoB) |
Select a Vehicle Control History item to display its freeze frame data.
| Tester Display | Description |
|---|---|
| Total Distance Traveled | Total driven distance |
| Total Distance Traveled - Unit | Unit for total driven distance |
| Stop Light SW | Brake pedal operation |
| High A/T Oil Temperature Count | High CVT fluid temperature occurrence count |
VEHICLE CONTROL HISTORY (AIRBAG SYSTEM)
A part of the control history can be confirmed using the Vehicle Control History.