Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › THEFT DETERRENT SYSTEM
RM3620E _58 Vehicle Interior _076037 THEFT DETERRENT / KEYLESS ENTRY _0373331 THEFT DETERRENT SYSTEM W

THEFT DETERRENT / KEYLESS ENTRY  THEFT DETERRENT SYSTEM  CUSTOMIZE PARAMETERS  


INSTALL CUSTOMIZE THEFT DETERRENT SYSTEM


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Customizing with the GTS.

i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Security or Wireless Door Lock.


v.

Select the setting by referring to the table below.

Security
Tester Display Description Default Setting ECU
Warning by Horn This function is used to enable or disable the warning by horn*1 ON 0:OFF,1:ON Main Body ECU (Multiplex Network Body ECU)
Intrusion Win Opened This function is used to set the sensitivity of the intrusion sensor when the windows are opened*2 OFF 00:OFF,01:ON Main Body ECU (Multiplex Network Body ECU)
Security control with mechanism key This function makes it possible to cancel the security alarm with the mechanical key*3 OFF 0:OFF,1:ON Main Body ECU (Multiplex Network Body ECU)
Window Open Warning This function is used to enable or disable the window open warning ON 0:OFF,1:ON Main Body ECU (Multiplex Network Body ECU)
Slide Roof Open Warning This function is used to enable or disable the sliding roof open warning*4 ON 0:OFF,1:ON Main Body ECU (Multiplex Network Body ECU)
50006 3

*1: for vehicles displaying the Item "Warning by Horn" on the GTS

*2: w/ Intrusion Sensor Cancel Switch

*3: for vehicles displaying the Item "Security control with mechanism key" on the GTS

*4: w/ Sliding Roof System


Wireless Door Lock
Tester Display Description Default Setting ECU
Panic Function This function operates the theft deterrent system by continuously pressing the panic switch on the electrical key transmitter sub-assembly for 0.8 seconds* ON 0:OFF,1:ON Main Body ECU (Multiplex Network Body ECU)
50006 1

*: w/ Panic Switch