Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › THEFT DETERRENT SYSTEM
RM3620E _58 Vehicle Interior _076037 THEFT DETERRENT / KEYLESS ENTRY _0373331 THEFT DETERRENT SYSTEM C

THEFT DETERRENT / KEYLESS ENTRY  THEFT DETERRENT SYSTEM  B2761  Intrusion Sensor Internal Circuit Malfunction  


DESCRIPTION

The theft warning ultrasonic and tilt sensor conducts self-diagnosis immediately after power is supplied to the sensor (when the theft deterrent system is set).

If a problem is detected in the signals transmitted and received by the theft warning ultrasonic and tilt sensor, or if the transmission or reception circuits malfunction, the theft warning ultrasonic and tilt sensor transmits a signal to the main body ECU (multiplex network body ECU). The main body ECU (multiplex network body ECU) then stores this DTC.

DTC No. Detection Item DTC Detection Condition Trouble Area
B2761 Intrusion Sensor Internal Circuit Malfunction Theft warning ultrasonic and tilt sensor outputs signal for sensor malfunction Theft warning ultrasonic and tilt sensor

PROCEDURE

1.REPLACE THEFT WARNING ULTRASONIC AND TILT SENSOR
a.

Temporarily replace the theft warning ultrasonic and tilt sensor with a new or normally functioning one.

Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>INTRUSION SENSOR>REMOVAL


Result:
Proceed to
NEXT



NEXT

END (THEFT WARNING ULTRASONIC AND TILT SENSOR WAS DEFECTIVE)