Home › Vehicle Exterior › WINDOW / GLASS › WINDSHIELD DEICER SWITCH
RM3620E _59 Vehicle Exterior _076527 WINDOW / GLASS _0373368 WINDSHIELD DEICER SWITCH G

WINDOW / GLASS  WINDSHIELD DEICER SWITCH  INSPECTION  


CAUTION / NOTICE / HINT

HINT:

Use the same procedure as for the LHD and RHD vehicles.


PROCEDURE

Hide 84794 1.INSPECT FRONT WIPER DEICER SWITCH

a.
B532152C01
2.49,1.708 2.01,1.26 true 1,1.688 1.417,1.271 true 1.802,1.719 1.604,1.302 true 0.854,1.729 1.24,1.938 0.385,0.208 10 false IG 2.542,1.729 2.698,1.927 0.156,0.198 10 false E 1.75,1.76 2.104,1.99 0.354,0.229 10 false IND 0.073,0.083 0.385,0.281 0.313,0.198 10 false *a
*a Component without harness connected
(Front Wiper Deicer Switch)


Inspect the front wiper deicer switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition

If the result is not as specified, replace the front wiper deicer switch.

5 (IG) - 2 (E) Front wiper deicer switch off 10 kΩ or higher
Front wiper deicer switch on Below 1 Ω



ii.

Check the indicator light illuminates.

OK:
Battery Connection Specified Condition

If the result is not as specified, replace the front wiper deicer switch.

Auxiliary battery positive (+) → 5 (IG)
Auxiliary battery negative (-) → 4 (IND)
Illuminates




b.
B532152C02
1.24,1.271 0.885,1.615 true 2.177,1.292 2.583,1.635 true 0.729,1.656 1.344,1.854 0.615,0.198 10 false ILL+ 2.552,1.667 3.167,1.865 0.615,0.198 10 false ILL- 0.094,0.104 0.406,0.302 0.313,0.198 10 false *a
*a Component without harness connected
(Front Wiper Deicer Switch)


Check the illumination.

i.

Apply battery voltage to the connector and check the illumination conditions.

OK:
Battery Connection Specified Condition

If the result is not as specified, replace the front wiper deicer switch.

Auxiliary battery positive (+) → 6 (ILL+)
Auxiliary battery negative (-) → 1 (ILL-)
Illuminates