85912F
1.INSPECT HWD RELAY (w/ Heated Windshield Defroster System)
Inspect the HWD relay (HWD NO.1).
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 5 | Auxiliary battery voltage not applied between terminals 1 and 2 | 10 kΩ or higher |
| 3 - 5 | Auxiliary battery voltage applied between terminals 1 and 2 | Below 1 Ω |
If the result is not as specified, replace the HWD relay (HWD NO.1).
Inspect the HWD relay (HWD NO.2).
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 5 | Auxiliary battery voltage not applied between terminals 1 and 2 | 10 kΩ or higher |
| 3 - 5 | Auxiliary battery voltage applied between terminals 1 and 2 | Below 1 Ω |
If the result is not as specified, replace the HWD relay (HWD NO.2).
Inspect the HWD relay (HWD NO.3).
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 5 | Auxiliary battery voltage not applied between terminals 1 and 2 | 10 kΩ or higher |
| 3 - 5 | Auxiliary battery voltage applied between terminals 1 and 2 | Below 1 Ω |
If the result is not as specified, replace the HWD relay (HWD NO.3).
84794
2.INSPECT FRONT WIPER DEICER RELAY (DEICER) (for Windshield Deicer)
Inspect the front wiper deicer relay (DEICER).
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 5 | Auxiliary battery voltage not applied between terminals 1 and 2 | 10 kΩ or higher |
| 3 - 5 | Auxiliary battery voltage applied between terminals 1 and 2 | Below 1 Ω |
If the result is not as specified, replace the front wiper deicer relay (DEICER).
3.INSPECT DEFOGGER RELAY (DEF)
Inspect the defogger relay (DEF).
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 4 | Battery voltage not applied between terminals 1 and 2 | Below 1 Ω |
| Battery voltage applied between terminals 1 and 2 | 10 kΩ or higher | |
| 3 - 5 | Battery voltage not applied to terminals 1 and 2 | 10 kΩ or higher |
| Battery voltage applied to terminals 1 and 2 | Below 1 Ω | |
| 4 - 5 | Always | 10 kΩ or higher |
If the result is not as specified, replace the defogger relay (DEF).