Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM
RM3620E _55 Steering _076851 POWER ASSIST SYSTEMS _0374399 POWER STEERING SYSTEM C

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM  C1511  Torque Sensor1  C1512  Torque Sensor2  C1513  Torque Sensor Deviation Excessive  C1514  Torque Sensor Power Supply Voltage  C1517  Torque Hold  C1521  Short in Motor Circuit  C1522  Power Supply Sensor  C1523  Current Deviation Excessive  C1528  Motor Rotation Angle Sensor  C1531  ECU Malfunction  C1532  ECU Malfunction  C1533  Temperature Sensor Circuit is Low or High  C1534  EEPROM  C1555  Motor Relay Welding Failure  


DESCRIPTION

While torque sensor system, motor system or ECU system malfunctions are detected, the fail-safe function suspends power assist. However, power assist continues with limited assistance amount if only C1533 or C1534 is output.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Return-to-normal Condition Note
C1511 Torque Sensor1 Torque sensor malfunction Rack and pinion power steering gear assembly EPS warning light: Comes on Ignition switch is turned to ON again -
C1512 Torque Sensor2 Torque sensor malfunction Rack and pinion power steering gear assembly EPS warning light: Comes on Ignition switch is turned to ON again -
C1513 Torque Sensor Deviation Excessive Torque sensor malfunction Rack and pinion power steering gear assembly EPS warning light: Comes on Ignition switch is turned to ON again -
C1514 Torque Sensor Power Supply Voltage Torque sensor malfunction Rack and pinion power steering gear assembly EPS warning light: Comes on Ignition switch is turned to ON again -
C1517 Torque Hold Torque sensor malfunction Rack and pinion power steering gear assembly EPS warning light: Comes on Ignition switch is turned to ON again -
C1521 Short in Motor Circuit Motor overcurrent Rack and pinion power steering gear assembly EPS warning light: Comes on Ignition switch is turned to ON again -
C1522 Power Supply Sensor Motor current sensor malfunction Rack and pinion power steering gear assembly EPS warning light: Comes on Ignition switch is turned to ON again -
C1523 Current Deviation Excessive Excessively large current deviation Rack and pinion power steering gear assembly EPS warning light: Comes on Ignition switch is turned to ON again -
C1528 Motor Rotation Angle Sensor Motor rotation angle sensor malfunction Rack and pinion power steering gear assembly EPS warning light: Comes on Ignition switch is turned to ON again -
C1531 ECU Malfunction ECU internal malfunction (CPU malfunction) Rack and pinion power steering gear assembly EPS warning light: Comes on Ignition switch is turned to ON again -
C1532 ECU Malfunction ECU internal malfunction (Peripheral circuit malfunction) Rack and pinion power steering gear assembly EPS warning light: Comes on Ignition switch is turned to ON again -
C1533 Temperature Sensor Circuit is Low or High ECU internal malfunction (Substrate temperature sensor malfunction) Rack and pinion power steering gear assembly EPS warning light: Comes on The ECU judges the system has returned to normal -
C1534 EEPROM ECU internal malfunction (EEPROM error) Rack and pinion power steering gear assembly EPS warning light: Comes on Ignition switch is turned to ON again -
C1555 Motor Relay Welding Failure Motor relay circuit malfunction Rack and pinion power steering gear assembly EPS warning light: Comes on Ignition switch is turned to ON again -

CAUTION / NOTICE / HINT

NOTICE:

If the rack and pinion power steering gear assembly has been replaced, perform assist map writing and torque sensor zero point calibration.

Click hereSteering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM>CALIBRATION


PROCEDURE

1.CHECK FOR DTC
a.

Clear the DTCs.

Chassis > EMPS > Clear DTCs
50002 142

b.

Check for DTCs.

Chassis > EMPS > Trouble Codes
50001 142

Result:
Result Proceed to
DTCs other than C1511, C1512, C1513, C1514, C1517, C1521, C1522, C1523, C1528, C1531, C1532, C1533, C1534 or C1555 are not output. A
DTCs other than C1511, C1512, C1513, C1514, C1517, C1521, C1522, C1523, C1528, C1531, C1532, C1533, C1534 or C1555 are output. B
DTCs are not output. C



A

REPLACE RACK AND PINION POWER STEERING GEAR ASSEMBLY

B

C