Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81510C
1.REMOVE FRONT TURN SIGNAL LIGHT BULB (for Triple Beam Headlight)
| *a | Matchmark |
| *b | Unlock Position Mark |
|
Turn in this Direction |
Insert a hand from the back side of the headlight, and then turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.
|
Remove in this Direction |
Remove the front turn signal light bulb from the bulb socket.
81510C
2.REMOVE FRONT TURN SIGNAL LIGHT BULB (for Single Beam Headlight)
| *a | Matchmark |
| *b | Unlock Position Mark |
|
Turn in this Direction |
Insert a hand from the back side of the headlight, and then turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.
|
Remove in this Direction |
Remove the front turn signal light bulb from the bulb socket.