Home › General › MAINTENANCE › REAR TURN SIGNAL LIGHT BULB
RM3620E _V1 General _076298 MAINTENANCE _0374472 REAR TURN SIGNAL LIGHT BULB A

MAINTENANCE  REAR TURN SIGNAL LIGHT BULB  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 81550L 1.INSTALL REAR TURN SIGNAL LIGHT BULB

a.
E402981C01
0,0 0,0 false
V113147

Install in this Direction


Install the rear turn signal light bulb to the bulb socket.


b.
E402970C01
1.542,1.042 1,0.49 true 1.573,0.26 1.115,0.365 true 3.052,0.656 3.156,0.927 true 1.583,1.01 1.792,1.198 0.208,0.188 10 true *a 1.604,0.167 1.813,0.323 0.208,0.156 10 true *b 3.083,0.948 3.292,1.104 0.208,0.156 10 true *c
*a Matchmark
*b Unlock Position Mark
*c Lock Position Mark
V113147

Turn in this Direction


Align the matchmark of the bulb socket with the unlock position mark, and then turn the bulb socket clockwise until the lock position mark to connect the bulb socket.


c.
E410311C01
1.438,0.979 1.625,1.156 0.188,0.177 10 true *a 0.917,1.323 1.115,1.5 0.198,0.177 10 true *b 1.833,1.521 2.031,1.698 0.198,0.177 10 true *b 2.167,1.51 2.365,1.688 0.198,0.177 10 true *b
*a Pin
*b Guide
V113147

Slide in this Direction


Slide the rear combination light assembly LH towards the vehicle front to attach the pin and guide.


d.
E402976

Install the 2 screws.


Hide 81498 2.INSTALL REAR COMBINATION LIGHT COVER LH

a.
E410307C01
0,0 0,0 false
V113147

Install in this Direction


Attach the claw to install the rear combination light cover LH.