Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
67848
1.REMOVE BACK DOOR SERVICE HOLE COVER LH
Using moulding remover A, detach the claw and guide to remove the back door service hole cover LH.
81550N
2.REMOVE BACK-UP LIGHT BULB
| *a | Unlock Position Mark |
|
Turn in this Direction |
Detach the wire harness clamp.
Turn the bulb socket counterclockwise until it is aligned with the unlock position mark to disconnect the bulb socket.
|
Remove in this Direction |
Remove the back-up light bulb from the bulb socket.