Home › Engine / Hybrid System › CRUISE CONTROL › ROAD SIGN ASSIST SYSTEM
RM3620E _51 Engine / Hybrid System _076038 CRUISE CONTROL _0374524 ROAD SIGN ASSIST SYSTEM U

CRUISE CONTROL  ROAD SIGN ASSIST SYSTEM  TERMINALS OF ECU  


CHECK FORWARD RECOGNITION CAMERA


NOTICE:
·

DTCs may be output when connectors are disconnected during inspection. Therefore, be sure to clear the DTCs using the GTS once the inspection has been completed.

·

Do not apply larger loads than necessary since the connector may be damaged.


E402277E04
2.083,0.823 2.427,1.063 0.344,0.24 2.156,0.865 2.479,1.073 0.323,0.208 10 false P8


a.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition

*1: w/o Stop and Start System

*2: w/ Stop and Start System

P8-7 (IGB) - P8-10 (GND) LA-P - W-B Power source Ignition switch ON 11 to 14 V*1
10.5 to 16 V*2
Ignition switch off Below 1 V
P8-10 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω