Home › Engine / Hybrid System › CRUISE CONTROL › ROAD SIGN ASSIST SYSTEM
RM3620E _51 Engine / Hybrid System _076038 CRUISE CONTROL _0374524 ROAD SIGN ASSIST SYSTEM C

CRUISE CONTROL  ROAD SIGN ASSIST SYSTEM  U010087  Lost Communication with ECM/PCM "A" Missing Message  U012587  Lost Communication with Multi-axis Acceleration Sensor Module Missing Message  U012987  Lost Communication with Brake System Control Module Missing Message  U014087  Lost Communication with Body Control Module Missing Message  U015587  Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message  U029387  Lost Communication with Hybrid Powertrain Control Module Missing Message  


DESCRIPTION

When a malfunction is detected between various ECUs and sensors, these DTCs are stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
U010087 Lost Communication with ECM/PCM "A" Missing Message 3 seconds or more after the ignition switch is turned to ON, while the vehicle is being driven at 1 km/h or 1 mph or more and the road sign assist system is on, a communication error between the ECM and the forward recognition camera is detected for approximately 5 seconds or more. CAN communication system
U012587 Lost Communication with Multi-axis Acceleration Sensor Module Missing Message While the vehicle is being driven at 1 km/h or 1 mph or more and the road sign assist system is on, a communication error between the yaw rate sensor (airbag sensor assembly) and the forward recognition camera is detected for approximately 5 seconds or more. CAN communication system
U012987 Lost Communication with Brake System Control Module Missing Message 3 seconds or more after the ignition switch is turned to ON, while the road sign assist system is on, a communication error between the skid control ECU and the forward recognition camera is detected for approximately 5 seconds or more. CAN communication system
U014087 Lost Communication with Body Control Module Missing Message 3 seconds or more after the ignition switch is turned to ON while the road sign assist system is on, a communication error between the main body ECU (multiplex network body ECU) and the forward recognition camera is detected for approximately 5 seconds or more. CAN communication system
U015587 Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message 3 seconds or more after the ignition switch is turned to ON, while the road sign assist system is on, a communication error between the combination meter assembly and the forward recognition camera is detected for approximately 50 seconds or more. CAN communication system
U029387 Lost Communication with Hybrid Powertrain Control Module Missing Message 3 seconds of more after the ignition switch is turned to ON, while the road sign assist system is on and the vehicle is being driven at 1 km/h or 1 mph or more, a communication error between the hybrid vehicle control ECU assembly and the forward recognition camera is detected for approximately 5 seconds or more. CAN communication system

PROCEDURE

1.CHECK FOR DTC
a.

Clear the DTCs.

Click hereEngine / Hybrid System>CRUISE CONTROL>ROAD SIGN ASSIST SYSTEM>DTC CHECK / CLEAR

Body Electrical > Road Sign Assist > Clear DTCs
50002 431

b.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



c.

Check for DTCs.

Click hereEngine / Hybrid System>CRUISE CONTROL>ROAD SIGN ASSIST SYSTEM>DTC CHECK / CLEAR

Body Electrical > Road Sign Assist > Trouble Codes
50001 431
OK:

DTCs U010087, U012587, U012987, U014087, U015587 and U029387 are not output.



Result:
Proceed to
OK
NG



OK

NG