The headlight ECU sub-assembly LH receives speed signals from the skid control ECU via CAN communication and performs light control.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Note |
|---|---|---|---|---|---|
| B2415 | Vehicle Speed Sensor | Detection condition:
The ignition switch is ON Malfunction status:
Wheel speed sensor invalid signals are continuously received from the skid control ECU Malfunction duration:
10 seconds or more |
Electronically controlled brake system | Headlight ECU sub-assembly LH | - |
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / HL AutoLeveling / Clear DTCs.
Clear the DTCs.
| Proceed to |
|---|
| NEXT |
NEXT
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Wait 10 seconds or more.
Turn the GTS on.
Enter the following menus: Body Electrical / HL AutoLeveling / Trouble Codes.
Check for DTCs.
DTC B2415 is not output.
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
NG
for HV Model:
for Gasoline Model: