Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY (for Triple Beam Headlight)
RM3620E _59 Vehicle Exterior _077130 LIGHTING (EXT) _0375585 HEADLIGHT ASSEMBLY(for Triple Beam Headlight) L

LIGHTING (EXT)  HEADLIGHT ASSEMBLY(for Triple Beam Headlight)  PRECAUTION  


NOTICE:

When disassembling the headlight assembly, use static electricity countermeasures SST (desktop antistatic mat set) and observe all precautions to prevent damage to the system by electrostatic discharge (ESD).


STATIC ELECTRICITY COUNTERMEASURES SST


E115129N01
0.479,0.188 2.344,0.188 true 1.406,0.74 1.406,0.188 true 2.906,0.521 2.448,0.521 true 1.885,1.969 2.156,1.604 true 0.188,0.115 0.646,0.313 0.458,0.198 10 false SST 2.979,0.438 3.323,0.667 0.344,0.229 10 false SST 2.198,1.51 2.542,1.74 0.344,0.229 10 false SST

SST: Desktop antistatic mat set

SST
09890-47010  (09891-04010, 09891-04020, 09891-04030, 09891-04040)

·

Wristband

·

Wristband connection wire (No. 1 grounding wire)

·

Antistatic mat

·

Ground connection wire (No. 2 grounding wire)



PRECAUTIONS DURING REPLACEMENT


a.

Precautions during procedures:

i.

Before performing any procedures, touch an unpainted metal part or ground bolt of the vehicle to eliminate any static electricity.


ii.

To prevent damage to an electrical equipment, disconnect the battery power supply before installing and removing the electrical equipment.


iii.

Never touch the electronic parts of a printed wire board or the pins of an integrated circuit.


iv.

When performing procedures, do not allow clothing to come near or contact parts.



b.
E115129N01
0.479,0.188 2.344,0.188 true 1.406,0.74 1.406,0.188 true 2.906,0.521 2.448,0.521 true 1.885,1.969 2.156,1.604 true 0.188,0.115 0.646,0.313 0.458,0.198 10 false SST 2.979,0.438 3.323,0.667 0.344,0.229 10 false SST 2.198,1.51 2.542,1.74 0.344,0.229 10 false SST

Wear SST (wristband) firmly on your wrist.

SST
09890-47010  (09891-04020)


c.

Connect SST (No. 2 grounding wire) and SST (antistatic mat) to an appropriate grounding point in the workspace and on the work table.

SST
09890-47010  (09891-04040, 09891-04010)

HINT:
E061414

When working inside the vehicle:

Connect SST (No. 2 grounding wire) to the unpainted metal part of a grounded bolt, etc.



d.

Connect SST (No. 1 grounding wire), SST (wristband) and SST (antistatic mat).

SST
09890-47010  (09891-04030)


e.

Always place the headlight assembly and its components on SST (antistatic mat).