1.INSPECT REAR COMBINATION LIGHT ASSEMBLY LH
| *a | Component without harness connected
(Rear Combination Light Assembly LH) |
Apply auxiliary battery voltage to the connector and check the light illumination conditions.
| Auxiliary Battery Connection | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → 1 (B)
Auxiliary battery negative (-) → 3 (E) |
Taillight illuminates |
| Auxiliary battery positive (+) → 2 (B)
Auxiliary battery negative (-) → 3 (E) |
Stop light illuminates |
If the taillight is not as illuminated, inspect the rear combination light LED.
If the stop light is not as illuminated, inspect the rear combination light LED LH.
2.INSPECT REAR COMBINATION LIGHT ASSEMBLY RH
| *a | Component without harness connected
(Rear Combination Light Assembly RH) |
Apply auxiliary battery voltage to the connector and check the light illumination conditions.
| Auxiliary Battery Connection | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → 1 (B)
Auxiliary battery negative (-) → 3 (E) |
Taillight illuminates |
| Auxiliary battery positive (+) → 2 (B)
Auxiliary battery negative (-) → 3 (E) |
Stop light illuminates |
If the taillight is not as illuminated, inspect the rear combination light LED.
If the stop light is not as illuminated, inspect the rear combination light LED RH.
81536A
3.INSPECT REAR COMBINATION LIGHT LED
| *a | Component without harness connected
(Rear Combination Light LED) |
Apply auxiliary battery voltage to the connector and check the light illumination conditions.
| Auxiliary Battery Connection | Specified Condition |
|---|---|
|
If the result is not as specified, replace the rear combination light LED. |
|
| Auxiliary battery positive (+) → 3
Auxiliary battery negative (-) → 2 |
Illuminates |
8158AC
4.INSPECT STOP LIGHT LED LH
| *a | Component without harness connected
(Stop Light LED LH) |
Apply auxiliary battery voltage to the connector and check the light illumination conditions.
| Auxiliary Battery Connection | Specified Condition |
|---|---|
|
If the result is not as specified, replace the stop light LED LH. |
|
| Auxiliary battery positive (+) → 2
Auxiliary battery negative (-) → 1 |
Illuminates |
8158AC
5.INSPECT STOP LIGHT LED RH
| *a | Component without harness connected
(Stop Light LED RH) |
Apply auxiliary battery voltage to the connector and check the light illumination conditions.
| Auxiliary Battery Connection | Specified Condition |
|---|---|
|
If the result is not as specified, replace the stop light LED RH. |
|
| Auxiliary battery positive (+) → 2
Auxiliary battery negative (-) → 1 |
Illuminates |