Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
1.INSTALL REAR COMBINATION LIGHT ASSEMBLY LH
|
Install in this Direction |
Pass the wire harness into the vehicle and install the grommet.
| *a | Pin |
| *b | Guide |
|
Push in this Direction |
Align the guide and pin to set the rear combination light assembly LH.
Push the rear combination light assembly LH towards the vehicle front to attach the pin and guide.
Install the 2 screws.
Insert your hand between the deck trim side panel assembly LH and the body and connect the connector.
81498
2.INSTALL REAR COMBINATION LIGHT COVER LH
|
Install in this Direction |
Attach the claw to install the rear combination light cover LH.
3.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
Return the rear side of the deck trim side panel assembly LH to its original position.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
58460D
4.INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY
58386
5.INSTALL REAR FLOOR FINISH PLATE
58417H
6.INSTALL REAR NO. 3 FLOOR BOARD
58410B
7.INSTALL DECK BOARD ASSEMBLY