CHECK SWING GRILLE ACTUATOR ASSEMBLY
Disconnect the A85 swing grille actuator assembly connector.
Measure the voltage and resistance according to the value(s) in the table below.
Measure the values on the wire harness side with the connector disconnected.
| Tester Connection | Wiring Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
| A85-1 (+B) - Body ground | R - Body ground | Battery power supply | Always | 11 to 14 V |
| A85-3 (GND) - Body ground | W-B - Body ground | Ground | Always | Below 1 Ω |