Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM (for HV Model)
RM3620E _51 Engine / Hybrid System _076038 CRUISE CONTROL _0375834 DYNAMIC RADAR CRUISE CONTROL SYSTEM(for HV Model) U

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM(for HV Model)  TERMINALS OF ECU  


CHECK HYBRID VEHICLE CONTROL ECU ASSEMBLY


C338835C19
1.25,0.323 1.667,0.583 0.417,0.26 3.135,0.302 3.552,0.563 0.417,0.26 5.865,0.313 6.281,0.573 0.417,0.26 3.688,0.302 4.104,0.563 0.417,0.26 5.292,0.313 5.708,0.573 0.417,0.26 1.333,0.375 1.792,0.573 0.458,0.198 10 false A29 3.281,0.104 3.74,0.302 0.458,0.198 10 false *A 5.385,0.365 5.844,0.563 0.458,0.198 10 false A30 3.76,0.354 4.219,0.552 0.458,0.198 10 false G64 5.948,0.354 6.406,0.552 0.458,0.198 10 false G63 3.229,0.365 3.688,0.563 0.458,0.198 10 false A31 5.417,0.125 5.875,0.323 0.458,0.198 10 false *A 3.792,0.115 4.25,0.313 0.458,0.198 10 false *B 6.01,0.125 6.469,0.323 0.458,0.198 10 false *B
*A for LHD *B for RHD


a.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition

*1: for LHD

*2: for RHD

A29-7 (STP) - A30-3 (E1)*1
A29-7 (STP) - G63-3 (E1)*2
G - W-B Stop light switch assembly signal Brake pedal depressed 11 to 14 V
Brake pedal released 0 to 1.5 V
A31-28 (ST1-) - A30-3 (E1)*1
G64-28 (ST1-) - G63-3 (E1)*2
LA-G - W-B *1
LA-LG - W-B *2
Stop light switch assembly signal Power switch on (IG), brake pedal depressed Below 1 V
Power switch on (IG), brake pedal released 11 to 14 V
A30-14 (CCS) - A30-3 (E1)*1
G63-14 (CCS) - G63-3 (E1)*2
LA-GR - W-B Cruise control switch circuit Cruise control switch not pushed 1 MΩ or higher
Cruise control main switch pushed Below 2.5 Ω
CANCEL switch pushed 228 to 252 Ω
+RES switch pushed 599 to 661 Ω
-SET switch pushed 1463 to 1617 Ω



CHECK FORWARD RECOGNITION CAMERA


NOTICE:
·

Turning the power switch on (IG) with connectors disconnected may cause DTCs to be stored. Make sure to clear the DTCs after inspection has been performed.

·

Do not apply excessive force to the forward recognition camera connector.



B472992N20
2.073,0.833 2.458,1.083 0.385,0.25 2.188,0.875 2.5,1.073 0.313,0.198 10 false P8

a.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
P8-3 (LKSW) - P8-10 (GND) R - W-B Steering pad switch assembly signal (distance control signal) Power switch on (IG), steering pad switch assembly (vehicle-to-vehicle distance control switch) on Below 1 V
Power switch on (IG), steering pad switch assembly (vehicle-to-vehicle distance control switch) off 4.75 to 5.25 V
P8-10 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
P8-7 (IGB) - P8-10 (GND) LA-P - BR Power source Power switch on (IG) 11 to 14 V
Power switch off Below 1 V