Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM (for HV Model)
RM3620E _51 Engine / Hybrid System _076038 CRUISE CONTROL _0375834 DYNAMIC RADAR CRUISE CONTROL SYSTEM(for HV Model) C

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM(for HV Model)  P057113  Brake Switch "A" Circuit Open  


DESCRIPTION

When the brakes are applied by the dynamic radar cruise control system, the skid control ECU (brake booster with master cylinder assembly) operates the stop light switch assembly to illuminate the stop lights.

If the hybrid vehicle control ECU assembly receives a signal from the skid control ECU (brake booster with master cylinder assembly) indicating a malfunction of the stop light switch assembly, DTC P057113 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
P057113 Brake Switch "A" Circuit Open When the dynamic radar cruise control system is operating, the hybrid vehicle control ECU assembly detects a signal indicating a stop light switch assembly malfunction from the skid control ECU (brake booster with master cylinder assembly) for approximately 1 second or more. Electronically controlled brake system Hybrid vehicle control ECU assembly

PROCEDURE

1.CHECK ELECTRONICALLY CONTROLLED BRAKE SYSTEM

HINT:

When P057113 is detected by the dynamic radar cruise control system, C1380 may also be detected in the electronically controlled brake system. Therefore, check the electronically controlled brake system first when P057113 is detected.


Result:
Proceed to
NEXT



NEXT

END