The hybrid vehicle control ECU assembly communicates with each sensor and ECU via CAN communication.
If any malfunction is detected in a CAN communication circuit, one or more CAN communication system DTCs are stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from |
|---|---|---|---|---|
| U010487 | Lost Communication with Cruise Control Module Missing Message | When the power switch is on (IG) and the dynamic radar cruise control system is operating, a communication malfunction between the millimeter wave radar sensor assembly and hybrid vehicle control ECU assembly is detected for approximately 1 second or more. | CAN communication system | Hybrid vehicle control ECU assembly |
| U012287 | Lost Communication with Vehicle Dynamics Control Module Missing Message | When the power switch is on (IG) and the dynamic radar cruise control system is operating, a communication malfunction between the skid control ECU (brake booster with master cylinder assembly) and hybrid vehicle control ECU assembly is detected for approximately 2.6 seconds or more. | CAN communication system | Hybrid vehicle control ECU assembly |
| U029387 | Lost Communication with Hybrid Powertrain Control Module Missing Message | When the dynamic radar cruise control system is operating, a communication malfunction between the skid control ECU (brake booster with master cylinder assembly) and hybrid vehicle control ECU assembly is detected for approximately 1 second or more. | CAN communication system | Hybrid vehicle control ECU assembly |
Clear the DTCs.
Make sure that the DTC detection conditions are met.
If the detection conditions are not met, the system cannot detect the malfunction.
Check for DTCs.
| Result | Proceed to |
|---|---|
| DTC U010487, U012287 and U029387 are not output | A |
| DTC U010487, U012287 or U029387 is output | B |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B