The forward recognition camera communicates with each sensor and ECU via CAN communication.
If any malfunction is detected in a CAN communication circuit, one or more CAN communication system DTCs are stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from |
|---|---|---|---|---|
| U012587 | Lost Communication with Multi-axis Acceleration Sensor Module Missing Message | When the vehicle speed is approximately 1 km/h (1 mph) or more, a communication error between the forward recognition camera and airbag sensor assembly (yaw rate and acceleration sensor) continues for 1 second or more. | CAN communication system | Forward recognition camera |
| U012687 | Lost Communication with Steering Angle Sensor Module Missing Message | When the power switch is on (IG) for 2 seconds or more, a communication error between the forward recognition camera and steering sensor continues for 5 second or more. | CAN communication system | Forward recognition camera |
| U012987 | Lost Communication with Brake System Control Module Missing Message | When the power switch is on (IG) for 2 seconds or more, a communication error between the forward recognition camera and skid control ECU (brake booster with master cylinder assembly) continues for 5 seconds or more. | CAN communication system | Forward recognition camera |
| U015587 | Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message | When the power switch is on (IG) for 2 seconds or more, a communication error between the forward recognition camera and combination meter assembly continues for 50 seconds or more. | CAN communication system | Forward recognition camera |
| U029387 | Lost Communication with Hybrid Powertrain Control Module Missing Message | When the dynamic radar cruise control system is operating, a communication malfunction between the hybrid vehicle control ECU assembly and forward recognition camera is detected for 5 seconds or more. | CAN communication system | Forward recognition camera |
| U110687 | Lost Communication with Electric Parking Brake Module Missing Message | When the power switch is on (IG) for 2 seconds or more, a communication error between the forward recognition camera and parking brake ECU assembly continues for 5 seconds or more. | CAN communication system | Forward recognition camera |
Clear the DTCs.
Make sure that the DTC detection conditions are met.
If the detection conditions are not met, the system cannot detect the malfunction.
Check for DTCs.
| Result | Proceed to |
|---|---|
| DTC U012587, U012687, U012987, U015587, U029387 and U110687 are not output | A |
| DTC U012587, U012687, U012987, U015587, U029387 or U110687 is output | B |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B