Do not disconnect the tube shown in the illustration when disassembling the fuel suction tube with pump and gauge assembly. Doing so will cause reassembly of the fuel suction tube with pump and gauge assembly to be impossible as the tube is pressed into the fuel suction plate sub-assembly.
Click hereEngine / Hybrid System>A25A-FKS (FUEL)>FUEL SYSTEM>PRECAUTION
83320
1.REMOVE FUEL SENDER GAUGE ASSEMBLY
23221
2.REMOVE FUEL PUMP
Detach the 2 claws and disconnect the fuel suction tube from the fuel suction with pump and gauge tube assembly.
Remove the O-ring from the fuel suction with pump and gauge tube assembly.
Detach the 4 claws and disconnect the sub-assembly support from the fuel suction with pump and gauge tube assembly.
Detach the 3 claws and remove the No. 1 cap from the sub-assembly support.
Remove the fuel pump from the sub-assembly support.
Disconnect the connector from the fuel pump.
Remove the O-ring from the sub-assembly support.
Remove the spacer from the fuel pump.