23221
1.INSTALL FUEL PUMP
Perform "Inspection After Repair" after replacing the fuel pump.
Install the fuel pump to the No. 1 cap.
Apply gasoline to a new O-ring.
Install the O-ring to the sub-assembly support.
Attach the 3 claws and install the No. 1 cap to the sub-assembly support.
Connect the connector to the fuel pump.
Attach the 4 claws and connect the sub-assembly support to the fuel sub-tank sub-assembly.
Apply gasoline to a new O-ring.
Install the O-ring to the fuel suction tube.
Attach the 2 claws and 2 clamps and connect the fuel suction tube to the fuel sub-tank sub-assembly.
83320
2.INSTALL FUEL SENDER GAUGE ASSEMBLY