Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM PUMP (for M20A-FKS)
RM3620E _54 Brake _076411 BRAKE SYSTEM (OTHER) _0376691 VACUUM PUMP(for M20A-FKS) G

BRAKE SYSTEM (OTHER)  VACUUM PUMP(for M20A-FKS)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1. OPERATION CHECK

a.

Slide the clip and disconnect the vacuum hose from the vacuum pump assembly.


b.
C409078C01
0.823,1.281 0.823,0.927 true 2.063,0.292 1.719,0.292 true 2.115,0.208 2.292,0.396 0.177,0.188 10 true *a 0.771,1.302 0.958,1.479 0.188,0.177 10 true *b
*a Vacuum Gauge
*b Plug


Connect the hose of the vacuum gauge to the vacuum pump assembly.


c.

Start the engine and warm it up for more than 2 minutes.


d.

With the engine idling, check the vacuum of the vacuum pump assembly.

Standard Pressure:

More than 86.7 kPa (650 mmHg, 25.6 in.Hg)


HINT:
·

If the pressure is less than the standard, disassemble and inspect the vacuum pump. If necessary, replace the vacuum pump assembly.

Click hereBrake>BRAKE SYSTEM (OTHER)>VACUUM PUMP (for M20A-FKS)>INSPECTION

·

Always perform this operation check procedure after replacing or servicing the vacuum pump assembly.




e.

Remove the vacuum gauge from the vacuum pump assembly.


f.

Connect the vacuum hose to the vacuum pump assembly and slide the clip to secure it.