Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM PUMP (for M20A-FKS)
RM3620E _54 Brake _076411 BRAKE SYSTEM (OTHER) _0376691 VACUUM PUMP(for M20A-FKS) A

BRAKE SYSTEM (OTHER)  VACUUM PUMP(for M20A-FKS)  DISASSEMBLY  


PROCEDURE

Hide 29314A 1.REMOVE END COVER

a.
C401029

Using a T30 "TORX" socket wrench, remove the 5 screws and end cover.

NOTICE:
·

Hold the pump so that the pump installation surface and fitting parts will not be damaged.

·

As the housing deforms when force is applied, do not secure the housing with a tool such as a vise.

·

Securely fit the T30 "TORX" socket wrench to the screws.

·

Do not drop the end cover.

·

Do not damage the end cover.




b.
C401030C01
1.802,1.115 2.208,0.708 2.208,0.708 2.302,0.708 false 2.344,0.625 2.656,0.781 0.313,0.156 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, remove the vacuum pump cover O-ring.

NOTICE:

Do not damage the groove.



Hide 29331A 2.REMOVE VACUUM PUMP VANE

a.
C401031

Remove the vacuum pump vane together with the 2 vacuum pump vane caps.


b.
C169339C23
2.729,0.688 2.875,0.24 2.875,0.24 2.958,0.24 false 1.969,1.25 2.271,1.677 2.271,1.677 2.354,1.677 false 0.344,0.635 0.417,0.635 0.417,0.635 0.552,1.094 false 2.396,1.594 2.74,1.802 0.344,0.208 10 false *2 0.198,0.563 0.469,0.719 0.271,0.156 10 false *1 2.99,0.146 3.24,0.313 0.25,0.167 10 false *1
*1 Vacuum Pump Vane Cap
*2 Vacuum Pump Vane


Remove the 2 vacuum pump vane caps from the vacuum pump vane.