Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM PUMP (for M20A-FKS)
RM3620E _54 Brake _076411 BRAKE SYSTEM (OTHER) _0376691 VACUUM PUMP(for M20A-FKS) A

BRAKE SYSTEM (OTHER)  VACUUM PUMP(for M20A-FKS)  REASSEMBLY  


PROCEDURE

Hide 29331A 1.INSTALL VACUUM PUMP VANE

a.

Apply engine oil to a new vacuum pump vane and 2 new vacuum pump vane caps and install the 2 vacuum pump vane caps to the vacuum pump vane.


b.

Apply engine oil to the vacuum pump vane with 2 vacuum pump vane caps and install it to the vacuum pump housing.


Hide 29314A 2.INSTALL END COVER

a.
C401033C01
2.51,3.135 2.99,2.885 2.99,2.885 3.073,2.885 true 3.104,2.802 3.417,2.958 0.313,0.156 10 false *1
*1 Vacuum Pump Cover O-ring


Install a new vacuum pump cover O-ring to the vacuum pump housing.

NOTICE:
·

Wipe off any oil on the vacuum pump end cover installation surface and end cover.

·

Check that no foreign matter is on the vacuum pump cover O-ring or inside the vacuum pump housing.




b.

Using a T30 "TORX" socket wrench, install the end cover with 5 new screws.

Torque:
7.5 N*m (76 kgf*cm, 66 in.*lbf)

NOTICE:
·

Hold the pump so that the pump installation surface and fitting parts will not be damaged.

·

As the housing deforms when force is applied, do not secure the housing with a tool such as a vise.

·

Securely fit the T30 "TORX" socket wrench to the screws.




c.
C401034

Turn the coupling clockwise as shown in the illustration and check that the coupling is not stuck or that there is no abnormal resistance.